UVA & UVC Lamps

Sort & Filter
Home UVA & UVC Lamps
Show12243648
Home UVA & UVC Lamps

Replacement UV lamps for in-duct and coil UV air treatment systems: Second Wind and Fresh-Aire UV UVC lamps, Honeywell UV2400 bulbs, Lennox UVA lamps for PureAir purifiers and GeneralAire ultraviolet lamps. Lamps are specific to each system, so match the part number on your old lamp or in your unit's manual.

Our most popular brands are Second Wind and Fresh-Aire UV UV lamps. For UV reactive media filters, see air cleaner filters.

UV lamp guide: matching lamps and FAQs ▾

Find the right lamp

Match the part number first. Then check the details in the title: lamp length (for example 15 or 18 inch), connector type (Fresh-Aire UV TUVL-215P has a pigtail connector, TUVL-215 does not) and rated life, since some lamps come in 1-year and 2-year versions, such as Fresh-Aire UV TUVL-115 and TUVL-215.

UV Lamp FAQs

How do I choose a UV light for my HVAC system?

Choose a UV light for your HVAC system based on what you want it to treat. The EPA says UV lamps can effectively inhibit mould and bacterial growth on cooling coils and drain pans, but typical home systems do not deliver enough dose to disinfect moving air, and UV does not remove particles. Coil systems such as Honeywell's UV2400 shine on the A-coil and work alongside your furnace filter.

How often should I replace a UV lamp in my furnace?

Replace a furnace or coil UV lamp at the end of its rated life, usually every one or two years, even if it still glows. Honeywell and Fresh-Aire UV both note that UV lamps keep giving off visible light while losing germicidal effectiveness. Honeywell says to replace UV2400 lamps every year, and Fresh-Aire UV makes 1-year (TUVL-115) and 2-year (TUVL-215) lamps.

How do I change a UV lamp in an HVAC system?

To change a UV lamp in an HVAC system, turn off power to the furnace or air handler and the UV unit, let the lamp cool for at least 15 minutes, and wear protective gloves. On a Honeywell UV2400, twist the lamp handle counterclockwise, pull it out, fit the new glass to the handle and twist it back in until it snaps. Never look at a lit UV lamp.

Can a UV light replace my furnace filter?

No, a UV light cannot replace your furnace filter, because UV light does not capture or remove particles such as dust and pollen. The EPA says UV germicidal systems in homes do not appear effective as a sole air cleaning device and should supplement particle filtration. Keep changing your furnace filter on schedule and use the UV lamp to limit growth on the coil and drain pan.

Do UV lights for HVAC systems produce ozone?

Some UV lights for HVAC systems can produce ozone. The EPA says UV lights without adequate lamp coatings may emit ozone, which is a lung irritant, and advises avoiding devices that intentionally produce it. Some lamps are made to produce ozone, such as the Sanuvox All-Ozone J lamp, so replace a lamp only with the same part number your system was designed for.

How do I dispose of an old UV lamp?

Dispose of an old UV lamp through your local hazardous waste or lamp recycling program, not household trash, because UV lamps contain a small amount of mercury. Honeywell says to contact your local waste management authority for recycling instructions. If a lamp breaks, Honeywell advises against using a household vacuum: sweep up the debris and seal it in a plastic bag for proper disposal.

Can I install a UV light in my furnace myself?

A UV light for a furnace or air handler should be installed by a licensed HVAC technician, because the unit is mounted in the ductwork and wired to power. Honeywell says the installer of its UV2400 must be a trained, experienced service technician, and Fresh-Aire UV says only qualified technicians should install its systems. Replacing the lamp in an installed system is routine owner maintenance.