Canarm Industrial Fan Speed Control, 5A
** Please note that this is a 'special order' item and shipping will take 2-3 weeks **
Minimum speed adjustment screw
Designed to fit a standard 3” x 5” electrical box
Mount in a dry location
Now available in 230V/1/60HZ
- Ideal for use on variable speed SD Standard Exhaust fans, AX, DFRC and AXC fans (not for use with single speed motors)
MINIMUM SPEED ADJUSTMENT
This control was designed to operate on Canarm Ltd. industrial fans. If you want to adjust the minimum speed, locate the minimum
speed adjustment and follow these instructions.
a) Motor must be in actual operating condition to achieve proper speed adjustment. (Motor will not slow down unless blades are
b) Turn main control knob clockwise to lowest speed position.
c) Locate and adjust minimum speed setting on front plate with screwdriver (rotate clockwise to increase minimum speed,
counter-clockwise to decrease minimum speed so that motor runs sufficient torque to prevent stalling. If fan stops on its own then
minimum setting is too low.).
d) Motor will now operate from this present minimum speed to full speed.
a) Install front dial plate (Remove protective plastic on face of dial plate).
b) Turn main control until switch clicks off.
c) Push on the knob ensuring that the pointer lines up with the off position
| Variable Speed Operation:
| Power Supply:
Breathe easy with the PureFilters Promise
PureFilters was founded with one mission - to help Canadians enjoy clean and healthy indoor air at a ice - our team at PureFilters goes above and beyond to help you enjoy quality indoor air.
If you need help with your order, feel free to contact us via live chat, or email us at firstname.lastname@example.org.